Shanghai huatong electrical group electrical science and technology Co., LTD.
The national free hotline：
400-869-7707
Address: Shanghai goughexin road no. 1301 B building 5f · Shanghai electric park
Tel：021-56558118
021-56558077
Fax：021-63506020
E-mail:C55555@qq.com http://www.chhuatong.com
KL junction box
Product features:：
● Doors and cabinet adopts special screw and retainer installed by general standard, not only to ensure the degree of protection and ensure the body in a very narrow space use and maintenance
● Box mouth multilayer protection channel not only can reinforce effect and can prevent the door play dirt and water into the box open
● PU foam sealing strip to ensure enclosure protection levelIP56
● Ground wire can be connected body and door plank
● Cabinet is equipped with a screw hole is open on both sides of stents, ensure the installation height of the largest, and can be installed support rail or mounting plate
● A special plastic insulation casing not only can seal and screw does not fall off, can make the door plank and screw up the guide role Specializing in the production of junction box, electrical box, cabinets, switch box, hanging wall of the box
 |
material : Cold rolled steel sheet Surface treatment: The box body and door plank of phosphating coating processing, the outside For the powder coating, the color can be divided intoRAL7032 And RAL7035 two textures Protection grade: IP56(According GB4205-1993) The standard configuration: Door plank, enclosure, sealing strip, lid screw, Mounting plate (optional) Mounting plate (optional): Thickness of steel plate box: 1.5 mm door: 1.5mm Mounting plate: 2.5mm |
Technical parameters：
material:
Cold rolled steel sheet
Surface treatment:
Body and door plank of phosphating coating processing, external for powder coating, the color can be divided into RAL7032 and RAL7035 two textures
Protection grade:
IP56(accordingGB4205-1993)
The standard configuration:
Door plank, enclosure, sealing strip, lid screw, mounting plate (optional)
The thickness of the steel plate:
Door plank of case: 1.5 mm, 1.5 mm plate: 2.5mm
|
B1: The total width B2: The width of the lid B3: Housing within the framework of the net width B4: Net width of two mounting bracket in the article B5: Within the framework of the distance between the article mounting bracket H1: the total high H2: The height of the lid H3: Housing within the framework of the net width H4: The distance between two floating nut T1: Total depth |
KL junction box series product specifications）
|
The serial number
|
The order no.
（RAL7032) |
The order no.
（RAL7035) |
high
|
wide
|
deep
|
|
1
|
KL151508002
|
KL151508005
|
150
|
150
|
80
|
|
2
|
KL151512002
|
KL151512005
|
150
|
150
|
120
|
|
3
|
KL152008002
|
KL152008005
|
150
|
200
|
80
|
|
4
|
KL152012002
|
KL152012005
|
150
|
200
|
120
|
|
5
|
KL202012002
|
KL202012005
|
200
|
200
|
120
|
|
6
|
KL203012002
|
KL203012005
|
200
|
300
|
120
|
|
7
|
KL203015502
|
KL203015505
|
200
|
300
|
155
|
|
8
|
KL203021002
|
KL203021005
|
200
|
300
|
210
|
|
9
|
KL303821002
|
KL303821005
|
300
|
380
|
210
|
|
10
|
KL383821002
|
KL383821005
|
380
|
380
|
210
|
